Quick answer: If a contractor damages your home, notify the contractor immediately, document the damage and based on the circumstances, contact the appropriate insurance companies. Responsibility often depends on how the damage occurred, who caused it and what insurance coverage is available. Homeowners insurance may help with certain sudden and accidental damage, while the contractor’s liability insurance, bond or warranty may also be involved.
before the project starts
Before you hire a contractor, be sure to do your homework, set a budget and ask these important questions before you hire anyone to remodel your home.
A home renovation, repair or installation project is supposed to improve your home—not leave you dealing with water damage, fire damage, structural problems or unfinished work. But contractor damage can happen, and the next step is not always obvious.
This article explains what to do first, who may be responsible, which insurance coverage may apply and why documentation matters. It also covers the difference between faulty workmanship and resulting damage, common contractor-damage scenarios, and steps you can take before hiring a contractor to help protect yourself.
You saved or borrowed money for a long-awaited kitchen remodel or home addition, and the project is finally underway. Then something goes wrong: crossed wiring sparks a fire, a subcontractor hits a support beam or materials are installed in the wrong rooms.
First, make sure everyone is safe, address any injuries and call the appropriate local agency if there is a fire or other serious emergency.
Follow these steps to be sure safety is maintained.
Once the situation is safe, documenting the damage to your home is the next priority. You’ll want to preserve as much information and evidence of what took place for potential insurance claims, if the need arises.
Depending on the circumstances and the severity of the damage, the next step is to contact your contractor. Here are some steps to take when you contact your contractor.
Start your home renovations safely. Learn if your current homeowners insurance covers your renovations and what to do before you begin.
Read MoreIf the damage to your home was caused by the contractor’s own work, the contractor may be responsible for repairing it or paying for the associated loss. That could include accidental damage, such as breaking a pipe, damaging a wall or causing a fire, as well as damage tied to negligence or poor workmanship. In many cases, this is why it is important to confirm that the contractor carries commercial general liability insurance before work begins.
Responsibility can be more complicated when a subcontractor causes the damage. For example, a plumber, electrician, roofer or flooring installer may be hired by the general contractor but perform the work that led to the loss.
Determining who is at fault will depend on the contract, the insurance coverage in place and who controlled the work; the claim may involve the general contractor, the subcontractor, or both.
Sometimes the issue is not only the contractor’s work but also the product or material used in the project. A defective appliance, fixture, pipe, electrical component, window or building material may contribute to the damage. In those situations, the manufacturer’s warranty, product liability coverage or installer warranty may become part of the conversation.
There are also situations in which the homeowner’s policy or prior maintenance history may affect the outcome. Pre-existing damage, hidden deterioration, code issues or maintenance problems can make it harder to determine whether the contractor caused the loss or simply uncovered an existing problem. In a scenario where a worker is injured on the property, the contractor’s workers’ compensation coverage may also matter.
When a contractor damages your home, more than one type of insurance or protection may come into play. The right place to start usually depends on what happened, who caused the damage and whether the issue is accidental damage, poor workmanship, an injury or an unfinished project.
The contractor’s commercial general liability insurance is often the first coverage to ask about if the contractor accidentally damages your property.
This type of policy generally helps with third-party property damage or injuries caused by the contractor’s work, but it is not the same as a warranty for poor work. That means it may help if, for example, a contractor breaks a pipe and causes water damage, but it may not pay simply to redo work that was not installed correctly.
This is why a certificate of insurance matters before work begins. A certificate can show that the contractor has insurance, the policy dates and the coverage limits. It does not guarantee that a specific claim will be covered, but it gives you important information if something goes wrong.
Your homeowners insurance should also be reviewed, especially if the damage is sudden and accidental. For example, if a fire, water leak or other covered event damages part of your home, your policy may help depending on the cause of loss, your deductible and your policy language.
If your insurer pays for covered damage and another party is found responsible, the insurance company may try to recover costs from the contractor’s insurer.
This process can take time, so it is important to keep photos, repair records, contracts, invoices and communication with the contractor organized and easily accessible for your insurer.
Workers’ compensation coverage matters if someone working on the project is injured on your property. A contractor with employees or subcontractors should be able to explain what coverage is in place. Without it, a homeowner could face a more complicated situation if an injury happens during the project.
Prior to signing a contract for work is another good time to review your coverage with your insurance agent. They can advise you about your current coverage, changes to your coverage during a renovation, and whether other insurance, like umbrella coverage, is warranted.
A contractor surety bond or workmanship warranty may also be part of the solution, but they work differently from insurance. A bond acts as a guarantee that the work will be completed and may help protect a customer if a contractor fails to complete work or meet certain obligations.
A warranty may address workmanship or materials for a set period. Neither should be treated as a replacement for checking homeowners insurance, reviewing the contract and keeping detailed project records.
A contractor mistake can feel like one big problem, but insurance may look at it in two different ways: the faulty work itself and the damage that happens because of that work. That distinction can make a big difference when you are trying to figure out who may pay for repairs.
Faulty workmanship is the work that was done incorrectly or does not meet the expected standard. That might include bathroom tile that was installed unevenly, kitchen cabinets that were not properly secured or exterior paint that was applied poorly.
In most cases, homeowners insurance does not pay simply to redo remodel work that was done incorrectly. You may need to work with the contractor, review the contract or warranty, or explore other options if the contractor will not correct the issue.
Resulting damage is the damage that occurs because of the contractor's faulty work. For example, if a plumbing mistake leads to sudden water damage throughout the home, faulty wiring causes a fire or a roofing error allows water to damage ceilings and walls, your homeowners insurance or the contractor’s liability insurance may become part of the claim. Coverage depends on the policy, the cause of loss and the facts of what happened.
The easiest way to think about it is this: insurance may treat the cost to fix bad work differently than the cost to repair damage caused by that bad work. If a contractor installs a pipe incorrectly, replacing or reinstalling the pipe may be an issue. Repairing the water-damaged flooring, cabinets or drywall may be another.
Before assuming whether something is covered, contact your insurance company or agent and share the documentation you have. Photos, contracts, inspection reports, invoices and written communication with the contractor can help everyone understand whether the issue is faulty workmanship, resulting in damage or both.
Contractor damage may be sudden, such as a leak, fire or structural issue, or emerge later from unfinished work.
The next step depends on the damage, contract and available coverage.
1. Plumber causes major water damage
A damaged line, faulty fixture or loose connection can harm floors, cabinets, walls and belongings. Photograph the damage before cleanup, save damaged materials and keep emergency repair receipts.
2. Electrician sparks a fire
If electrical work causes fire or smoke damage, call emergency services, avoid unsafe areas and wait for clearance. Keep reports, photos, estimates and contractor records for insurers.
3. Roofer damages siding, gutters or interior ceilings
Roof work may dent gutters, crack siding or allow leaks. Photograph interior and exterior damage and keep inspection notes or repair recommendations identifying the cause.
4. Excavation damages a foundation, driveway or utility line
Excavation can damage driveways, foundations, irrigation or utilities. Stop work if unsafe, contact the appropriate agency and keep photos, permits, utility markings, reports and contractor messages.
5. Contractor abandons the project
An abandoned project may leave unsafe, unfinished work and added costs. Insurance may not cover completion, but a bond, warranty, contract or legal remedy may help. Keep payment records, messages, change orders and photos.
6. Hidden defects appear months later
Leaks, wiring faults, roofing errors or structural problems may appear months later. Review the original records and warranty, notify the contractor in writing and consult your insurer before assuming coverage.
| Situation | Coverage or Remedy That May Apply | What to Know |
| Water damage from a contractor accident | Contractor liability and/or homeowners insurance | Document the source, damaged items and repair costs before cleanup. |
| Fire caused during renovation | Contractor liability and possibly homeowners insurance | Emergency response reports and contractor records may be important. Document the source, if known, and the damaged items. |
| Poor-quality workmanship | Contractor warranty, bond or legal remedies | The cost to redo defective work may be treated differently from the resulting damage. Keep contracts, payment records and messages. |
| Worker injured on property | Contractor workers’ compensation | Ask for proof of workers’ compensation before work begins. |
| Contractor disappears or abandons project | Bond claim, legal action or insurance review | Keep contracts, payment records, messages and evidence of non-completion. |
| Subcontractor causes damage | General contractor, subcontractor liability or homeowners insurance | Responsibility may depend on contracts, insurance coverage and who controlled the work. Document the source, if known, and the damaged items. |
The best time to avoid a contractor-damage problem is before the project starts. Verify that the contractor is licensed for the work, ask for a current certificate of insurance and confirm whether the contractor carries both general liability insurance and workers’ compensation coverage.
Get the agreement in writing, including the scope of work, materials, timeline, payment schedule, change-order process and who is responsible for subcontractors.
Before demolition or installation begins, take photos and videos of existing conditions so there is a record of what the home looked like before work started.
It can also help to use milestone-based payments instead of paying most of the project cost upfront. That way, payment is tied to completed work, inspections or agreed-upon progress. These steps do not prevent every problem, but they can make insurance, liability and repair questions easier to sort out if something does go wrong.
A remodel, repair or addition can change the way you use your home and the risks your policy may need to address. Before work begins, review your homeowners insurance with your agent so you understand your deductible, dwelling coverage, personal property coverage, loss-of-use coverage and any limitations that may apply during construction. Also, be sure to discuss whether you’ll be living in the home during construction, as that can affect your insurance coverage.
You can also ask whether the size or cost of the project should be reported to your insurer, whether coverage changes are needed while work is underway and whether umbrella insurance or other protection makes sense for your situation. The goal is to find coverage gaps before there is damage, not after.
before demo day
A contractor accident can create expensive surprises. Schedule a AAA Triple Check® review or connect with a local AAA Insurance agent to understand your homeowners coverage before starting a renovation or repair project.
It may, if the damage is sudden, accidental and covered by your policy. Poor workmanship itself is often treated differently from damage caused by that workmanship.
Faulty workmanship is work that was done incorrectly or does not meet the expected standard, such as improperly installed materials or poor-quality repairs.
The claim may involve the subcontractor, the general contractor or both, depending on the contract, insurance coverage and who controlled the work.
You may need to review your homeowners policy, the contractor’s bond or warranty, and other options for recovering costs. Keep all records and consider getting professional guidance before signing anything.
A bond may help when a contractor fails to meet certain obligations, such as completing the work. It is not the same as homeowners insurance or general liability insurance.
Ask your insurance company or agent about the best next step. Depending on the facts, your homeowners insurer, the contractor’s insurer or both may need to review the damage.
Legal options depend on the contract, state law and the facts of the damage. If the dispute cannot be resolved through insurance, warranty, bond or contractor negotiations, you may want to speak with a qualified legal professional.
This information is being provided for general informational purposes only. The Auto Club Group does not assume any liability in connection with providing this information.
Note: AAA Triple Check® is not available in Colorado